RN53 氡探测器

发布时间:2018-06-21浏览次数:428
PDF PDF

  Radon Detector RN53

      - For Continuous Radon Monitoring (CRM) Systems

      - Ultra Low Power Requirement

  Description

  The RN53 Radon Detector operates on the method of electrostatic collecting of the radon 222Rn progeny 218Po and 214Po. Both 218Po and 214Po decay via alpha emission. A PIN diode, which is part of the RN53 detector, continuously detects the alpha particles being emitted during the decay of 218Po and 214Po. An integrated energy spectrum analyzer separates the signal of undesired decay products. The rate of the output pulses of the RN53 is a direct measure for the radon gas concentration in the sampled air.

  Electrostatic collecting of the decay products of the radon gas is a precise and reliable method to get a representative measure for the concentration of radon in the environment being monitored.


  Features and Benefits

  · Continuous monitoring of radon concentration

  · Ultra low power requirement for battery powered applications

  · Integrated energy spectrum analyzer

  · TTL/CMOS compatible pulse output

  · Swiss made


  Application Areas

  · Environmental monitoring in IoT

  · Integration in commercial CRM systems

  · Natural sciences courses and practical lab experiments


  Absolute Maximum Ratings

  Supply voltage, VCC to GND                                                       18.0V

  Collecting voltage                                                                        1000V

  Output short-circuit duration                                                      continuous

  Storage temperature range                                                         -65°C to 100°C


  Electrical Characteristics

  Unless otherwise indicated specified at:

  VCC = 4.5V; TA = 23°C; relative humidity RH = 20%;

  Measuring chamber volume: 169cm3; collecting voltage: +400V


  Output pulse level                                     Equal to supply voltage (positive going)

  Output pulse width                                   200μs (LOW?HIGH?LOW)

  Supply voltage range, VCC                        2.5V to 15.0V

  Supply current, IS                                      20μA TYP

  Collecting voltage range                          +50V to +800V

  Operating temperature range                  -20°C to 60°C

  Pulse count rate                                        95 pulse counts per hour ±10% typical at 1000Bq/m3

                                                                    Note:

                                                                    The pulse count rate highly depends on factors such as

                                                                    - design of the measuring chamber

                                                                    - collecting voltage

                                                                    - humidity and temperature of the environment


下一篇:RN53 启动器套件
上一篇:BG51 辐射传感器
产品展示
  • AL53 辐射传感器

  • BG51 辐射传感器

  • RN53 氡探测器

  • RN53 启动器套件

会员注册

账号*

密码*

确认密码*

姓名*

性别*

先生 女士

电话*

公司名称*

公司所在地*

Email*

验证码*

立即登录
找回密码

账号*

验证码*